User's Guide

9.5 Troubleshooting Firmware Updates
ClearCube Technology, Inc. 107
You can now continue to verify your firmware installation as described in 9.2 “Identify Firmware
on Device You Are Updating” on page 105.
9.4.2 Host Card
1. Click Reset to reset the PCoIP processor, and then click OK. After several moments the
device displays the message: The PC o IP pr oc es sor will rese t on t he ne xt
host syste m r es t art; yo ur ch a nges wi ll take eff ect t h en. A re
you s ure y ou wan t to pr oceed ?
2. Click OK to continue. If a session is active, you can reset the remote blade (the host system)
by pressing the remote power button on the zero client.
If a session is not active, you can remove the blade from the chassis and then re-insert it to
reset the system.
You can now continue to verify your firmware installation as described in 9.2 “Identify Firmware
on Device You Are Updating” on page 105.
9.5 Troubleshooting Firmware Updates
If upgrading firmware does not seem to have any effect:
 Verify the integrity of the .zip file using your file compression tool of choice.
 Be sure to reset the device before verifying the update