Owner manual

Page 7 of 14 P/N G0200157 Rev E, 1.4.12.11.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 [phone] www.clearcube.com
Rack Rails and Mounting
Rack rail
components
Two rack rail assemblies are included with an M1020W-Series Engineering Workstation. Each
assembly has two sections:
 Inner rails: attach to the workstation chassis (the inner rail is pre-attached), and
 Outer rack rails: attach to rack
The picture below shows the inner chassis rails and the outer rack rails.
Continued on next page
Inner Rail
Pre-Assembled
Inner Rail Extension
Attach to Chassis
Outer Rack Rails
Slide Front into Rear & Attach
Front and Rear Brackets to Rack
Front Bracket
Rear Bracket