Owner manual
Table Of Contents
Page 2 of 14 P/N G0200157 Rev E, 1.4.12.11.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
M1022W Overview and Features
M1022W
overview
The M1022W Engineering Workstation is a 1U, GPU-optimized, high-performance engineering
workstation based on the Intel
®
C602 chipset. The list below shows M1022W features.
Intel Xeon
®
E5-2600/1600 series processor (up to 8 cores and up to 130 W)
8 × DIMM slots, 240-pin DDR3
Up to 256 GB DDR3 ECC Registered memory (RDIMM)
Up to 64 GB DDR3 ECC and non-ECC UDIMM
1600/1333/1066 MHz ECC DDR3 SDRAM, 72-bit
Supports 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, and 1 GB DIMMs
6 × 2.5-inch SATA hot-swap drive bays
Support for RAID:
0, 1, 5, and 10 on Windows
®
operating systems
0, 1, and 10 on Linux
®
operating system
3 × Ethernet ports (2 × LAN ports and 1 × dedicated IPMI port)
Support for IPMI 2.0
M1022W front
panel
The picture and table below show indicators and buttons on the front panel of an M1022W.
Indicator or
Button
Description
1
Overheat/
Fan Fail
Solid: overheat condition.
Flashing: fan failure.
To troubleshoot, ensure that cables do
not obstruct air flow, ambient room
temperature is appropriate, and all
fans are installed and operating. Also
ensure that the chassis cover, all
airflow shrouds, and all heat sinks are
installed properly.
2
NIC 2
Flashing: network activity.
3
NIC 1
Flashing: network activity.
4
HDD
Flashing: hard disk drive activity.
5
Power
(Indicator)
Solid: power is supplied to M1022W.
6
Reset
Press to restart M1022W.
7
Power
(Button)
Press to power on and power off
M1022W.
Continued on next page
2
3
4
5
6
7
1