User`s guide

R Series Data Center Products User’s Guide, Rev. B Chassis and Blade Installation • 37
1. Unscrew the thumbscrew holding each pair of chassis and rack brackets together,
and slide the brackets apart.
2. Mount the chassis bracket to the chassis with 4 flathead screws. Repeat on the
other side.
NOTE: The chassis and rack brackets are interchangeable side-for-side.
3. Determine the location and holes to be used to mount the rack ears on the rack
bracket. A guide is provided in the CRM packaging. Insert rack ears on
spring-loaded slider to the back side of the back rack post.
4. Pull the rack bracket forward and insert the front rack ears on the back bracket
into holes on the front side of the front post. Push forward on the ears until the
latch snaps and locks into place. Ensure the front ears are placed into the
Figure 15 Rack Bracket for CRM Kit
Figure 16 Rack Bracket Attachment Points
Front Rack Ears Locking Latch
Main Bracket Finger Handle
Spring Slider
Flanges
Slider (Back)
Rack Ears
Back of Rack Bracket Front of Rack Bracket