Owner's manual

Page 2 of 6 P/N G0200166 Rev A, 1.0.05.14.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 [phone] www.clearcube.com
Before You Begin
Safety and
precautions
If your zero client contains a smart card reader:
Prevent ESD (electrostatic discharge) damage to smart card readers by always
discharging your body and smart card before using a reader (for example, by touching a
grounded, unpainted, metal object). ESD can vary depending on many environmental
conditions, including clothing that users wear and how they handle smart cards. ESD damage can
potentially cause unsupported card reader behavior including failure. Always perform ESD prevention
steps before using the card reader.
Setup and
cooling
requirements
The list below shows setup and cooling requirements. Ensure that:
 Ambient temperature around a zero client does not exceed 35° C (95° F).
 No objects are stacked on the zero client or are blocking the client’s vents (such as papers, folders,
computer speakers, or any other objects).
 Adjacent furniture (file drawers, desk supports, chairs) do not block or enclose any sides of the zero client.
 The zero client is not in any enclosed environment such as on a shelf or inside a drawer.
Tools required
The list below shows tools needed for installation.
 Phillips head screwdriver
 Pencil or pen for marking mounting holes (for under-desk mounting)
 Drill and
32
3
-inch bit (for under-desk mounting)