Manual

C7130 and C7120 C/Port Installation • 15
Before Tuning a C/Port
Download the ClearCube C/Port Tuning Guide,
Tuning a C7130 Connected to an R4300 Chassis
A C7130 connected to an R4300 performs Auto-tuning for both sharpness and color. In most
cases, no further adjustment is required. However, a small amount of fine-tuning is possible.
Do the following:
1. Open the ClearCube C/Port Tuning Guide (downloadable from the ClearCube Technology
Support Web site and shown in Figure 10
on page 15). If the picture is sharp, you are
finished.
2. If desired, fine-tune the C/Port. See “Fine-Tuning Model C7130 C/Ports
” on page 16.
If the colors on the screen are noticeably mis-aligned, verify that the three color tuning
switches are set to position F. If resetting the color switches to position F has no effect, use the
procedures in “Tuning a C7130 Connected to an R4200 Chassis
” on page 15.
Tuning a C7130 Connected to an R4200 Chassis
Do the following:
1. Open the ClearCube C/Port Tuning Guide (downloadable from the ClearCube Technology
Support Web site and shown in Figure 10
on page 15). The colors on the screen should be
noticeably mis-aligned.
Figure 10. ClearCube C/Port Tuning Guide