User's Manual
Table Of Contents
- Preface
- Chapter 1: System Description
- Chapter 2: System Interface
- Chapter 3: Preparing for a New Case
- Chapter 4: System Operation
- Chapter 5: System Settings
- Chapter 6: Review Case Data
- Chapter 7: Cleaning and Maintenance
- Chapter 8: Troubleshooting
- Appendix A: Technical Specifications
- SmartSponge® Flex System Dimensions
- Power Requirements
- Environmental Conditions
- SmartSponge Flex Sponges and Towels
- MRI Information
- EMC Considerations
- Guidance and Manufacturer’s Declaration – Emissions
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Immunity
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Emissions
- Equipment and Systems that are NOT Life-supporting
- Recommended Separation Distances between portable and mobile RF Communications equipment and the ClearCount SmartSponge Flex Model A04
- Equipment and Systems that are NOT Life-supporting
- Device Label
Chapter 5: System Settings - Edit Settings Mode 5-3
•
•
•
•
•
•
There are five adjustable items within the Edit Settings mode. They are described as follows:
Edit: Date/Time
Press “EDIT: DATE/TIME” from the Edit Settings mode screen, to adjust the system’s date and time. The Edit
Date/Time screen will appear where the system’s date and time can be adjusted with up and down arrows for
both the date and the time. Adjust a number within the screen, by pressing that number and then adjust its value
with the up and down arrows. When finished, press the ACCEPT button to save your changes or press the
CANCEL button to abandon the changes.
As a reference, the system’s date and time are displayed in the top middle of the Edit Settings screen, as well
as the Boot Up screen when system is first powered on.
Figure 5-2 Edit: Date/Time Screen
Select number
to change.
Change value
with up and
down arrows.