User's Manual
Table Of Contents
- Preface
- Chapter 1: System Description
- Chapter 2: System Interface
- Chapter 3: Preparing for a New Case
- Chapter 4: System Operation
- Chapter 5: System Settings
- Chapter 6: Review Case Data
- Chapter 7: Cleaning and Maintenance
- Chapter 8: Troubleshooting
- Appendix A: Technical Specifications
- SmartSponge® Flex System Dimensions
- Power Requirements
- Environmental Conditions
- SmartSponge Flex Sponges and Towels
- MRI Information
- EMC Considerations
- Guidance and Manufacturer’s Declaration – Emissions
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Immunity
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Emissions
- Equipment and Systems that are NOT Life-supporting
- Recommended Separation Distances between portable and mobile RF Communications equipment and the ClearCount SmartSponge Flex Model A04
- Equipment and Systems that are NOT Life-supporting
- Device Label
4-10
Chapter 4: System Operation
•
•
•
•
•
•
Warning!
•
Do not fill the Count Out Basin beyond its fill line. Items above the fill line
may not be counted.
•
Packs of sponges, either partial or complete, may not be counted when
discarded into the Count Out Basin. If a pack is discarded and the contents
cannot be read, separate the sponges from each other to ensure a correct count.
Notes
•
The Count Out Basin will not count items while the system is in
COUNT
IN
mode. Likewise, the In Scanner will not scan items in while the system is
in
COUNT OUT
mode.
•
Sponges contained within count bags or pocket-type devices may be
discarded directly into the Count Out Basin.