User's Manual
Table Of Contents
- Preface
- Chapter 1: System Description
- Chapter 2: System Interface
- Chapter 3: Preparing for a New Case
- Chapter 4: System Operation
- Chapter 5: System Settings
- Chapter 6: Review Case Data
- Chapter 7: Cleaning and Maintenance
- Chapter 8: Troubleshooting
- Appendix A: Technical Specifications
- SmartSponge® Flex System Dimensions
- Power Requirements
- Environmental Conditions
- SmartSponge Flex Sponges and Towels
- MRI Information
- EMC Considerations
- Guidance and Manufacturer’s Declaration – Emissions
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Immunity
- All Equipment and Systems
- Guidance and Manufacturer’s Declaration – Emissions
- Equipment and Systems that are NOT Life-supporting
- Recommended Separation Distances between portable and mobile RF Communications equipment and the ClearCount SmartSponge Flex Model A04
- Equipment and Systems that are NOT Life-supporting
- Device Label
1-6
Chapter 1: System Description
-
SmartWand
•
•
•
•
•
•
Table 1-2 SmartWand Components
Component Description
Wand Handle Used to hold the SmartWand while the wand
is in use.
Bi-Color LED Changes with the wand’s detection status.
Off - Nothing detected
Solid Blue - SmartTag detected
Solid Amber - SmartSponge being detected
Single-Color LED Changes with the wand’s status.
Solid Green - Wand attached and powered
Off - Wand not attached or not powered
Wand Cord Provides power and communications to the
SmartWand from the SmartSponge Flex.
Wand Connector BNC connector used to connect the wand’s
cord to the SmartSponge Flex.