User guide

Mute on: It does not send local voice. (On/Off)
End call: End the current call.
New call: Dialed a new call.
New message: Enter write message interface.
Send DTMF: Send DTMF.
Contacts: Enter contacts list.
Volume: Change volume.
4.6 M1/M2/M3/M4 function
You can store up to 4 numbers in your phone’s direct memory for quick and easy
dialing.
In the off-hook or hands-free state, press either M1/M2/M3/M4 to dial the
corresponding number. If you have not set the number, press the SET key to
program the number, then press the left soft key to save it.
4.7 Call waiting
You can use this feature to put a call on hold (by pressing the right soft key) and
answer another call on the same line. Contact your service provider to subscribe to
the Call waiting service.
Location: MenuÆ SettingsÆ Call settingsÆ Call waitingÆOn/Off/Check status.
4.8 Making a multiparty call
Multiparty Calling is a feature that enables you to set up a three-way conversation
with two other users. Contact your service provider to activate or deactivate
Three-way Calling. Please make sure your SIM card supports the call waiting and
multiparty function.
1. Power on your phone, and make the first call.
2. Keep the communication connected and dial another telephone number (the
first call will be put on hold while making the second call). Repeat this step to
invite a third party to the conversation. (Up to 6 members could be in a
conference).
After all the required numbers were dialed, press the left soft key to select call
meeting, and then press the left soft key to enter this menu. The relevant function
could then be selected.
4.9 Low-power indicator
When the battery is exhausted the phone will sound an alarm and show "Low
battery" on the screen.
4.10 Charge indicator
When using the battery as power source, the AC adapter should be used for charging
the battery when it’s exhausted. The battery power indicator bar will start to flicker. The
indicator will stop flickering when the battery is fully charged.
12