Instruction manual

1 4
R S - 601 B ELTP A CK
The RS-601 is not recommended for use with RTS-TW systems as
the frequency response curves and audio levels are different. Clear-
Com’s RS-603 series beltpacks are compatible with RTS-TW systems.
Intercom Connector
The beltpack connects to a main station, power supply, or to other
beltpacks through the connector labeled “intercom.” When you press
the blue button next to this connector, the attached cable releases.
Table 1: Pinouts for RS-601 Intercom and Loop-Through Connectors
Loop-Through Connector
The “loop-through” socket can be used to connect the beltpack to
another beltpack. It can also connect to an intercom station if
necessary.
Table 1 shows the pin assignments for this connector.
PIN FUNCTION
1Ground
2+ 30 VDC
3Intercom
11
12