Turntable User Manual

Ovatio
n
User manual
Page 11  clearaudio electronic GmbH 2012
Now you can connect the
Ovation turntable to the mains supply.
2.8 Fine speed adjustment
The motor adjustment is already pre set at the factory. During transportation or due to
contamination on the sensor or the sensor ring some small speed deviations can occur.
Please check the speed before using the turntable for the first time.
For the correct adjustment of the speed please put the delivered clearaudio Stroboscope
Testrecord on the platter. Follow the instruction of the Stroboscope Testrecord user manual. To
check the speed with highest accuracy, please use the clearaudio Speed Light (AC039) (available
under: www.analogshop.de).
Pic. 11: Connection to the mains supply