User Manual
Page / Seite 4 © clearaudio electronic GmbH, 2022-12
User manual / Bedienungsanleitung
Phonostages provide a very high level of amplication, to address the fact that the electrical signal
generated by a phono cartridge is extremely low. As a result, phonostages are extremely sensitive,
which leads to the potential problem that high-frequency interference may also be amplied to
a point at which it becomes noticeable. Unfortunately it is not possible to completely protect the
sensitive phonostage circuitry from this interference without degrading its high delity performance.
Therefore care must be taken to position the phonostage away from sources of high frequency
interferences such as mobile phones, modems and powerline communication systems (PLC) in
which data is sent over the mains power network.
4. Overload
The product is designed to comply with all necessary safety regulations, however you should not
leave the device unattended under extreme loads.
5. Maintenance
Only use a soft cloth with a smooth surface for cleaning. Never use agressive cleaning detergent.
6. Health information
Permanently high volume can lead to various types of hearing damage. Use high volume responsibly!
7. Service
During the gurantee period, the
basic V2
may only be repaired by the manufacturer, otherweise the
warranty will become void.
All Clearaudio products should only be serviced by specialist retailer.
If despite the high production standard, a repair is necessary, the
basic V2
must be sent to Clearaudio
through your dealer.
8. Transport
Always us the original packaging when transporting the Clearaudio
basic V2
.
Be sure to pack the device exactly as it was shipped.
Safe transport is only guaranteed in the original packaging.
When packing, proceed in reverse as described for assembly.
9. Disposal
Do not dispose this product together with other waste.
WEEE Reg. No.: DE26004446
10. CE Marking
This electronic product corresponds to the applicable guidelines for obtaining the CE mark.