Specifications

11
Step 2: Setting up the Cellular Repeater
Once you have established what part of your home has the best signal,
you are ready to set up the Clear Voice repeater system.
1. Temporarily place the directional outdoor antenna in the
location with the best signal and connect it to the 30 foot cable.
2. Connect the rest of the equipment as shown in the diagram to
the right.
3. Connect the power adapter to the port marked “DC IN” on the
bottom side of the repeater. WARNING: The DC Power Adapter is
labeled: Output 3.8V, 3.0A. DO NOT use other adapters. The PWE
light will turn on, and the CEL and PCS lights on the front of the unit
will turn from Green to Orange and nally to Red before turning
back to Green, which indicats normal operation.
Move onto Step 3 to nd out how to align the directional antenna.
When selecting a location for the internal amplifier, make sure that
you choose a location is at least 15 feet away from the directional
outdoor antenna. This ensures isolation between the two antennas,
and prevents feedback and oscillation from occuring. Installing the
outdoor antenna at an elevation or making sure that there is a wall
between the outdoor antenna and the amplifier will further improve
isolation.
Make sure that the directional outdoor antenna is pointing away from
the indoor amplifier before continuing.