Specifications
10
Ideal Internal Amplier Location:
• Inside the building, as central as possible (this is to maximize the
coverage area).
• In the room where you will be most often using your cell phone.
This room will receive the best coverage.
To nd the strongest cellular signal outside your home or oce simply
walk around with your cell phone on. You should use a cell phone on the
network whose signal you are trying to improve. The “Signal Strength”
bars on your cell phone will tell you where the signal is strongest. Your
cell phone’s signal strength bars take up to 30 seconds to update, so you
should wait in each location before moving on.
The place you choose should register at least 2 bars of signal on your cell
phone. If you cannot nd a strong enough signal, you will need to use a
Yagi antenna – visit our website or call us for more information.
In many cases, placing the directional antenna in an elevated position
(for example or your roof) will improve the quality of the signal.
We provide 30 feet of low-loss cabling with our Clear Voice repeater kits
(40 feet with the Ultra Kit). If you need more cable, you can purchase
from our website or call us. You should note that using additional cable
attenuates the signal, and lowers the coverage area. However, if using 30
feet of extra cable would allow you to reach an area with one extra bar
of signal, then this is highly recommended.
In many cases, placing the directional antenna in an elevated position
(for example or your roof) will improve the quality of the signal.
If you are unable to install the directional antenna outside or above your
home, it can also be installed in an attic or by a window where signal
strength is 2 bars or more. However, an external installation is always
preferable.
Once you have identied the locations for the amplier and the external
directional antenna, move onto the next step.