User manual

CLEARjet GmbH CX-one
4. TIPS ON INSTALLATION AND SAFETY
The CX-one OEM Module is designed for installation in a variety of other devices (e.g.
vending machines, ticket dispensers). To ensure trouble-free implementation, we
recommend the following practices.
Adhering to safety standards, acquiring certification, and upholding industry
standards are entirely the responsibility of the product integrator. They are not the
responsibility of Clearjet GmbH.
•
Fire Protection:
The various components of the CX-one printer mechanism are high-quality
components and materials with flammability class V0.
However, as the device contains numerous electronic components, as well as a
heating element with a high operating temperature, the Module should be installed
in a fire-resistant casing.
Consult the relevant standards and regulations for the environment in which the
finished device/machine will be implemented (e.g. EN-60950 for data processing
devices in the office environment).
•
Mounting:
The Module is mounted using four screws (M4) at the base of the device (for
mounting position, see Section 2 – Scale Diagram of the Printer Mechanism).
If you are installing the Module without vibration dampers, ensure that you leave
sufficient space below the motor (c. 2 mm). The motor has an elastic mounting and
may vibrate lower than the base of the device.
•
Operating Position:
The optimal position for the Module is horizontal. Installing the device at a steep
angle or vertically may lead to problems with functionality.
•
Buffer space:
The scale diagram (Section 2) gives various specifications for leaving buffer areas
around the device. These are absolutely essential for the smooth running of the
printer, and also ensure easy access to the device for maintenance, service and
replacement of consumables.
It is particularly important to keep sufficient distance between the conductive parts
of the printer housing and the electronic components of the mechanism.
Depending on the printer options implemented (e.g. magnetic encoding), it may also
be necessary to leave room behind the device for card movement.
• Cables:
Make sure to use cables with sufficient wire dimensions. In particular, too high
voltage drop can lead to poor print quality.
OEM-User Manual page 7 /19