User manual

CLEARjet GmbH CX-one
Transparent mode ON <ESC>6
Description
Enables the transparent mode.
A gateway from RS 232 - HOST to RS 232 - CHIP is
opened. All following data are copied to the other interface
and vice versa.
This function works with 9600 Bd for RS 232 - CHIP port.
This feature allows communication with internal interface-
devices by use of only one RS 232 -Port.
ASCII – Code
<ESC>6
HEX – Code
1B 36
Transparent mode OFF <ESC>7PRINTER
Description
Disables the transparent mode.
To leave the transparent mode,the host communication
must suspend for 50 ms and the command
<ESC>7PRINTER must fulfill a intercharacterdelay
<50 ms.
ASCII – Code
<ESC>7PRINTER
HEX – Code
1B 375052494E544552
<ESC> 6
<ESC> 7PRINTER
CHIP-Interface
RS 232 -
CHIP
RS 232 -
HOST
CX-one
Printercontroller
• In normal operating mode the printer-unit is controlled via the interface
RS 232 - HOST and the chipreader via RS 232 - CHIP.
• With the command <ESC>6 the "transparent mode" is activated.
The HOST interface path is switched from the printer to the chipreader.
• To switch back the interface path to the normal operating mode, use the
command <ESC>7PRINTER
Note: For hardware-details see CX-one OEM-Manual.
Programmers Manual Page 40 / 53