User manual

CLEARjet GmbH CX-one

Get erase area <ESC>%l

Description

This command returns you the actually set erase area

in y-direction.

ASCII – Code

<ESC>%l

HEX – Code

1B 25 6C

Example

<ESC>%l

Response: 400700

Shift print area <ESC>o[c][nnn]

Description

This command enables you to shift the print area

in y-direction.

[c]... + shift in print-direction

[c]... - shift against print-direction

Note: Power down or a printer reset within 5 sec. after

using this command may cause unpredictable results.

ASCII – Code

<ESC>o[c][nnn]

HEX – Code

1B 6F [c][nnn]

Example

<ESC>+070

The print area is shifted 7 mm in print direction

Rotate print image 180° <ESC>T

Description

Rotate whole card ( text and graphic) by 180°.

Note: The position of origin is rotated too!

This command must be used before the print position

commands for x- and y-direction.

ASCII – Code

<ESC>T

HEX – Code

1B 54

Example

<ESC>T rotated text<FF>

Result:

print direction

Programmers Manual Page 33 / 53