User manual

CLEARjet GmbH CX-one
Print position y-coordinate <ESC>y[nnn]
Description
Sets the print position of the following text to position y.
The parameter [nnn] determines the offset from zero in
micro lines. The printable y area ranges from 100 to 990
ASCII – Code
<ESC>y[nnn]
HEX – Code
1B 79 [nnn]
Example
<ESC>y400
print position
y
=400
0
10
print
direction
20
30
40
48
990 400 300 200 100 000
Limit print area <ESC>d[nnn][mmm]
Description
The print area is limited to the domain [nnn] to [mmm]
[nnn] possible values range from 000 to 990
[mmm] possible values range from 000 to 990
Note: Power down or a printer reset within 5 sec. after
using this command may cause unpredictable results. The
size of the print area ([mmm] – [nnn]) must not exceed 720.
ASCII – Code
<ESC>d[nnn][mmm]
HEX – Code
1B 64 [nnn][mmm]
Example
<ESC>d200300
The print area is limited to the designated area.
print area
print
direction
990 400 300 200 100 000
Programmers Manual Page 30 / 53