User manual

CLEARjet GmbH CX-one
2.3.3 Print- and erase commands
Start printing {DATA} <FF>
Description
Printing of previous sent data starts after <FF>.
( find the character-set table at Appendix of this manual )
ASCII – Code
{DATA} <FF>
HEX – Code
{DATA} 0C
Print position x-coordinate <ESC>x[nn]
Description
Sets the print position of the following text to position x.
The parameter [nn] determines the offset from zero;
Possible values for [nn] between 00 and 48.
ASCII – Code
<ESC>x[nn]
HEX – Code
1B 78 [nn]
Example
<ESC>x10
print position
x=10
0
10
20
30
print
direction
40
48
990 400 300 200 100 000
Programmers Manual Page 29 / 53