User manual

CLEARjet GmbH CX-one
Read parameter from RAM <ESC>Mm [nn]
Description
Read presently used parameter from RAM memory.
[nn] parameter-code (See table below).
ASCII – Code
<ESC>Mm [nn]
HEX – Code
1B 4D 6D [nn]
Example
<ESC>Mm00
Read presently used printenergy value from RAM
Response : +00150
Return-Parameter
from printer
1 char. sign
5 numerical characters
Parameter-Code <ESC>M - Parameter function
00 Printenergy
01 2
nd
domain printenergy
02 Startposition 2
nd
domain printenergy
03 Endposition 2
nd
domain printenergy
04 Start hysteresis
05 End hysteresis
06 Erase temperature
07 Printposition offset
08 Erase temperature offset
09 Printenergy offset
Restore factory settings <ESC>$Oc
Description
Reset all permanent stored parameters to their default
values.
ASCII – Code
<ESC>$Oc
HEX – Code
1B 24 4F 63
Programmers Manual Page 21 / 53