User manual

CLEARjet GmbH CX-one
2.3 Detailed command descriptions
2.3.1 General control commands
Enable printer <ESC>1
Description
Enables the printer to take a card from front. When
inserted the card is moved to the print position
( = chipreader position). In this position data transfer to the
chipcard is possible.
Note: The yellow LED indicates that the printer is ready to
insert a card.
ASCII – Code
<ESC>1
HEX – Code
1B 31
Disable printer <ESC>2
Description
Deactivates the printer after the “Enable Printer” command
has been used. The yellow LED goes out.
If a card is currently in the printer, it remains in the slot.
ASCII – Code
<ESC>2
HEX – Code
1B 32
Return card <ESC>3
Description
Returns the card without printing and disables the Printer
ASCII – Code
<ESC>3
HEX – Code
1B 33
Programmers Manual Page 15 / 53