User manual

CLEARjet GmbH CX-one
Special commands
Command Parameter Description Page
<ESC>8 - Auxiliary mode ON 39
<ESC>7PRINTER - Auxiliary mode OFF 39
<ESC>6 - Transparent mode ON 40
<ESC>7PRINTER - Transparent mode OFF 40
<ESC>c - Get card from hopper 41
<ESC>%h - Eject card on backside 41
<ESC>Y - Capture card 41
<ESC># - Read direction detector 41
Barcode Encoding
Command Parameter Description Page
<ESC>z [n]{DATA}<CR> Print barcode 42
<ESC>$b [n] Mirror barcode 42
<ESC>%b - Read Barcode 42
<ESC>%z [n] Print barcode with double width 43
Magnet encoding
Command Parameter Description Page
<ESC>$Mr1 [n] Read magnetcode ISO 44
<ESC>$Mr2 [n] Read magnetcode JIS I 44
<ESC>$Mr31 Read magnetcode JIS II 45
<ESC>$Mw1 [n][mmm]{DATA} Write magnetcode ISO 45
<ESC>$Mw2 [n][mmm]{DATA} Write magnetcode JIS I 46
<ESC>$Mw31 [mmm]{DATA} Write magnetcode JIS II 46
<ESC>$m [n] Auto read 47
<ESC>$w [n] Auto eject after write 47
Programmers Manual Page 14 / 53