User manual

CLEARjet GmbH CX-one
Character and Font Commands
Command Parameter Description Page
<ESC>C - Select Font 3 ( small ) 27
<ESC>D - Select Font 2 ( medium ) 27
<ESC>E - Select Font 1 ( large ) 27
<ESC>h [n] [m] Get charactersize 27
<ESC>b [n] Print double-width character 28
<ESC>w [n] Print double-height character 28
Print – and erase Commands
Command Parameter Description Page
{DATA}<FF> - Start printing 29
<ESC>x [nn] Print position x-coordinate 29
<ESC>y [nnn] Print position y-coordinate 30
<ESC>d [nnn] [mmm] Limit print area 30
<ESC>e [nnn] [mmm] Limit erase area 31
<ESC>%p - Get print area 31
<ESC>$a [l][mm][nnn][oo][ppp] Partial erase 32
<ESC>%l - Get erase area 33
<ESC>o [c] [nnn] Shift print area 33
<ESC>T - Rotate print image 180° 33
<ESC>U - Reset 180° rotation 34
<ESC>O - Rotate print image 90° vertical 34
<ESC>N - Reset 90° rotation 35
<ESC>u [n]{DATA}<CR> Print format, right aligned 35
<ESC>G [b] {DATA} Send graphic data 36
<ESC>$G [b] {DATA} Send greyscale graphic data 37
<ESC>J [h] Micro line feed 37
Card transport commands
Command Parameter Description Page
<ESC>F - Start motor forward 38
<ESC>B - Start motor backward 38
<ESC>S - Stop motor 38
<ESC>j [hh] Microstep forward 38
<ESC>k [hh] Microstep backward 38
Programmers Manual Page 13 / 53