User manual

ManualsBrandsClear jet ManualsComputer equipmentCX-one

CLEARjet GmbH CX-one

2.2 Command overview

General control commands

Command Parameter Description Page

<ESC>1 - Enable printer 15

<ESC>2 - Disable printer 15

<ESC>3 - Return card 15

<ESC>$Op [c] [nnn] Printenergy offset 16

<ESC>$Ol [c] [nnn] Erase temperatur offset 16

<ESC>i [c] Set printer resolution 17

<ESC>Q [n] Disable eraser roller heating 17

<ESC>%L [n] Disable erase roller heating permanent 18

<ESC>P - Paperticket mode 18

<ESC>$p [n] Move-in erase 19

<ESC>MS - Save bitram 19

<ESC>MR - Restore bitram 19

<ESC>Ms - Save parameter 20

<ESC>Mr - Restore parameter 20

<ESC>Ml [nn] Read parameter from EEPROM 20

<ESC>Mm [nn] Read parameter from RAM 21

<ESC>$Oc - Restore factory settings 21

<ESC>r [n] Reset 22

<ESC>$R - Reboot 22

<ESC>%O [n] Read counters and S/N 22

Printer status commands

Command Parameter Description Page

<SUB> - Brief status 23

<ESC>A [n] Printhead status 24

<ESC>a - Firmware code 24

<ESC>$E - ERROR code 25

Programmers Manual Page 12 / 53