User manual

CLEARjet GmbH CX-one
5.3.3 Controlling of the RF Chip Encoder
For chip encoding the card is moved with the standard printer command to the reading
position (<ESC>1). In the next step the chip interface can be accessed via the interface
'RS 232' or via 'USB'. After conclusion of the chip transaction the card can be
erased/printed and/or ejected by use of the normal printer commands.
Please find detailed descriptions for printer commands in the CX-one Programmers
Manual. The controlling of the RF chip interface depends on the used chip/tag and the
built-in module. Please find details in the specific Manual of the RF-Interface or ask for
Active CX SDK.
The Active CX SDK (software development kit) includes ActiveX packages for
controlling the RF chip encoding modules as well as a programmer's manual with
detailed information about programming RF modules and the functionality of the
supported tags.
Possible Combination
• RF chip encoding transport + hopper
• RF chip encoding transport + direction detector
User Manual page 34 / 40