User manual

CLEARjet GmbH CX-one
5.2.2 Possible Installations
Contact Chip Encoder Standard
• Chip read/write for chip cards with T=0 or T=1 protocol
• Card feeding from the front
• Chip on top or bottom side of the card is possible
• Controlling by 'RS 232' or 'USB' possible
• Driver for Windows available
Contact Chip Encoder with Through Transport
• Chip read/write for chip cards with T=0 or T=1 protocol
• Card feeding from the front or from back (hopper) is possible
• Chip on top or bottom side of the card is possible
• Controlling by 'RS 232' or 'USB' possible
• Driver for Windows available
Contact Chip - Contact Set
Only the contact set for the chip card is integrated inside the printer. Therefore the
installation of commercial chip readers is possible.
• Chip on top or bottom side of the card is possible
• Card feeding from the front
• Controlling by 'RS 232' or 'USB' possible
Contact Chip – Contact Set with Through Transport
Only the contact set for the chip card is integrated inside the printer. Therefore the
installation of commercial chip readers is possible.
• Chip on top or bottom side of the card is possible
• Card feeding from the front or from back (hopper) is possible
• Controlling by 'RS 232' or 'USB' possible
Possible Combination
• Contact chip encoding with transport + hopper
• Contact chip contact set with transport + hopper
5.2.3 Controlling the Contact Chip Encoder
For chip encoding the card is moved with the standard printer command to the reading
position (<ESC>1). In the next step the chip interface can be accessed via the interface
'RS 232' or via 'USB'. After conclusion of the chip transaction the card can be
erased/printed and/or ejected by use of the normal printer commands.
User Manual page 32 / 40