User manual

CLEARjet GmbH CX-one
2 TECHNICAL INFORMATION
2.1 Specifications
• 3 internal standard fonts
• Graphics mode / text mode
• Printing of text and graphics via windows driver
• Max. resolution of 300 x 600 dpi
• Serial interface: 9600 Bd, 38400 Bd or 57600 Bd (switchable)
• USB interface Rev 1.1 (FULL Speed 10 MBaud)
• Rotate the printing area in 90° steps
• Prints cards with thermochromic surface
• Prints thermo-direct tickets
• Integration of many chip card interfaces possible
• Special model for magnetic cards (R/W)
• Special model for barcodes – printing and reading
• Special model with automatic card loading
Transaction Speeds
• Card throughput ⇒ c. 240 mm/sec.
• Erase speed ⇒ c. 60 mm/sec.
• Print speed ⇒ c. 60 mm/sec.
Specific speeds may vary when special materials or applications are used.
• Operating performance: max. 150 cards per hour
2.2 Environment
The device is designed for use in an office or similar environment.
You should position your printer on a sturdy, even surface in a well-ventilated room.
Room temperature should be moderate, with no abrupt temperature changes or
variations in humidity. The CX-one needs to be kept out of direct sunlight and away
from chemicals.
Storage and Delivery Conditions
• Storage temperature: 0°C to +50°C
• Relative humidity: 10% to 90% (no condensation)
Operative Conditions
• Temperature: +10°C to +35°C
• Relative humidity: 20% to 80% (no condensation)
• Keep out of direct sunlight
• Keep away from chemicals, liquids, lubricants, dust, etc.
User Manual page 14 / 40