Installation Guide

8
END OF WORKSTATION SECTION
(G) 30" Deep Surfaces
Extend the frame equal to the surface width. Center arm brackets to surface
depth. Secure frame to surface using wood screws (B) and secure handset
using wood screws (C).
5 | SECURE POWER CORD & INSTALL FEET
Secure power cord to the control box. Secure locking screws on the adjustable
beam and install the feet using screws (D) for each leg. If workstation is complete,
flip over. Reference handset guide for initialization and operation functions.
Note: Use T-feet if using T-arm brackets.