Installation Guide

7
WORKSTATION
(E) 24"D x 54"–72"W Surfaces without Dividers
Extend the frame equal to the surface width. Center arm brackets in reference to
surface depth. Secure frame to surface using wood screws (B) and secure
handset using wood screws (C).
(F) 24"D x 54"–72"W Surfaces with Side Dividers
If using side dividers, inset the frame 2” from each end. Center arm brackets to
surface depth. Secure frame to surface using wood screws (B) and secure
handset using wood screws (C).
Note: If using side dividers AND a facing divider with BSBHL, replace the
arm brackets with BHA19.
2" 2"