Specifications

F E AT UR E S
• Connect digital matrix systems
with a host of other communi-
cations systems
• Two sizes of interface frames:
3 RU x 11 interfaces and
1 RU x 2 interfaces
• Seamless interfacing with tele-
phone, two-way radio, cameras,
party-line intercom, IFB sys-
tems, other communications
systems and control devices
• Interfaces are compatible with
Matrix Plus, MicroMatrix, and
other digital intercom systems
• Specialty panels for transformer
isolation, interfacing with IFB
receivers, and connections
between Matrix Plus II and
Matrix Plus 3 systems
IMF-3, IMF-102, TEL-14, CCI-22, FOR-22, RLY-6,
GPI-6, IFB-104, BAL-8, PIA-32, PSU-101
Matrix Plus
®
Interfaces
by Clear-Com
D I G I T A L I N T E R C O M
D ES C R I P T I O N
Clear-Com's sophisticated modular interface system is optimized for use with
intercom systems. Interfacing permits Matrix Plus, MicroMatrix™,
®
and other
digital intercom systems to connect to and communicate via other types of
communications systems.
The modular interfaces are mounted into interface frames, which provide the
necessary connectors, communications busses, and power. The IMF-3 frame
holds up to 11 modules,
and the IMF-102 holds
two. The frames also pro-
vide the capability for
redundant power supply,
for fail-safe reliability.
When an interface is
connected to a port of the
matrix frame, the system recognizes and auto-congures it - easing installation
and operations. Interfaces are available to connect telephones, party-line and
camera intercoms, two-way radios, and other 4-wire audio circuits. Other inter-
faces enable control functions via the matrix.
I N T E R F AC E F R A M E S
The IMF-3 is a 3-RU interface frame that holds up to 11 modules. Modular
rear-mounted connector panels feature two RJ-45 connectors to the matrix ports
and two DB-9's attaching the connected devices. The frame is used in conjunc-
tion wi
th the PSU-101 rack-mountable power supply, providing power to the
enclosed interfaces. A second PSU-101 may be attached for redundancy.
The IMF-102 interface frame combines an internal power supply, connection
for a second redundant supply, a rear input/output connector panel, and slots for
two modular interfaces— all in a 1-RU chassis. The compact frame oers a
practical way to add a small quantity of interfaces to a MicroMatrix, Matrix
Plus, or other digital intercom system.
IMF-3 Interface Frame, Rear View
Top: The IMF-102 interface frame with optional TEL-14 and CCI-22 interfaces
Bottom: The IMF-3 interface frame with various optional interfaces
30