Specifications
MD-XLR Headset Adapter
These adapters enable headsets with dynamic
mics and XLR connectors to interface with all
the DX Series headset jacks. An active built-in
circuit provides impedance matching and DC
isolation. XLR adapters interface with 4P male,
4P female or 5P male headset connectors.
Note: Compatible with HME DX100, 121, 210,
and 300ES.
Headset Extension Cable
Six-foot headset extension cable for all
mini-DIN DX Series headset connectors.
Note: Compatible with HME DX210 and 300ES.
HSI6000 Headset Interface Adapter
The HSI6000 allows a standard 2.5mm
cell phone headset to be connected to the
DX Series beltpacks.
Note: Compatible with HME DX210 and 300ES.
Foam pads and spare parts available
for all headsets and microphones.
GN-250/GN-450 Gooseneck Microphones
GN-250-25cm/10in Plug-in gooseneck microphone.
GN-450-45cm/18" Plug-in gooseneck microphone.
Note: Compatible with I-Series and ICS panels.
110 Series Gooseneck Microphones
The 110 series of gooseneck condenser
microphones offer excellent frequency response,
audio sensitivity, and flexible design. Supplied
with threaded 3-pin male DIN connectors
and windscreens. Available in three sizes:
110/100 – 10 cm (3.9"), 110/340 – 34 cm (13.4"),
110/490 – 49 cm (19.3").
Note: Compatible with V-Series and 4224EBL panels.
GM-9/GM-18 Gooseneck Microphones
The GM-9 (9" length) and GM-18 (18" length)
gooseneck microphones feature a gold-plated,
threaded, and locking three-conductor quarter-inch
phone plug connector. A fitted windscreen is
included. The uni-directional electret condenser
mic element has a side and rear rejection of
greater than 6dB between 100Hz and 10kHz.
Note: Compatible with I-Series and ICS panels.
HS-6Telephone-style Handset
Telephone-style handset with wall/console
mount hanger, push-to-talk switch. Six foot
coil cord with 4-pin female XLR connector.
PT-7Hand-held Microphone
Rugged, push-to-talk, hand-held microphone
with mounting clip. Five foot coil cord with
4-pin female XLR connector.
Intercom HandsetsIntercom Microphones
29