User guide

80 Tempest®24 00 4-Channel Wireless Intercom System
System Features
• All digital, frequency hopping spread spectrum technology - no frequency coordina on needed
• 2.4G Hz o ers World-Wide opera on with no licensing requirements in most world-wide loca ons
• 2xTX™ transmission voice data redundancy technology
• Accu Sync™  ming system for improved performance with mul ple BaseSta ons
• ZSync Technology for improved performance with mul ple BaseSta ons covering mul ple coverage zones
• iSelect™ On-Command roaming
• Seamless Roaming allows users to move freely from one coverage zone to another
• Four intercom channels and up to 5 full duplex BeltSta ons per BaseSta on in Normal Mode
• Con gure up to 10, 2.4G HZ BaseSta ons with 25 full duplex BeltSta ons in a single system when opera ng in
Normal Mode
• An unlimited number of BeltSta ons per BaseSta on in Shared and Split Mode
• BeltSta ons can access intercom channels in “Dual-listen” mode
• Weather resistant BeltSta ons
• BeltSta ons can send and receive “Call Alert” signal from wired intercom systems
• Silent vibrate mode on BeltSta ons
• Both “Stage Announce” and GPO Relay func on available for each BeltSta on
• Talk switches can be de-latched via the Mic Kill feature from either the BaseSta on or the hardwire intercom
• Auxiliary audio input and output
• Program Volume control allows user to set volume of incoming program audio
• LAN control interface
• Electret or Dynamic Mic auto select
• Mul ple antenna connec on op ons
• Compa ble with Clear-Com®, RTS®, Telex®, and other 2-Wire and 4-Wire intercom systems