User guide

75 Tempest®24 00 4-Channel Wireless Intercom System
No audio passing when not using an external hardwired intercom system and Tempest BaseSta ons are
sharing intercom channels.
• Con rm that no wired intercoms are connected to the system.
• Con rm a 3-pin XLR cable connec on for each channel to be shared, between each of the BaseSta ons.
• Set the BaseSta on 2-Wire Intercom Type Select Switches to the Clear-Com posi on.
• Select 2-Wire for the relevant channels. Set only
one of the Tempest BaseSta ons to Master Mode.
No audio passing when using an external hardwired intercom system and Tempest BaseSta ons are
sharing intercom channels.
• Con rm a 3-pin XLR cable connec on for each channel to be shared, between each of the BaseSta ons.
• Set the BaseSta on 2-Wire Intercom Type Select Switches to the appropriate posi on.
• Select 2-Wire for the relevant channels.
• For each channel to be shared, connect the wired intercom to one of the BaseSta ons.
Audio can only be passed from one BaseSta on to another in the “Clear-Com mode”
unless actually connected to to another type of wired intercom system. Connec ng
any wired intercom to any BaseSta on will automa cally disable Master Mode and
disconnect all shared channels that do not have a wired intercom connected.
When connec ng any shared BaseSta ons to any wired intercom system, only
channels connected to the wired system can be shared.