User guide

41 Tempest®24 00 4-Channel Wireless Intercom System

BeltSta on Setup

The BeltSta on can be con gured in three ways. It can be con gured by the BeltSta on menu, wirelessly by the BaseSta on

menu, or using the PC interface called T-Desk. While many func ons are available through all three methods, certain

features are only available through the BeltSta on.

See T-Desk manual for details on conﬁ guring by PC.

Conﬁ gure the BeltSta on by the BeltSta on Menu

Using a combina on of controls and Menu se ngs, you can set a variety of levels and op ons directly from the BeltSta on

controls. The mul purpose “CH A/B” and “CH C/D” controls operate di erently depending on the mode of the BeltSta on.

In Opera onal Mode, rota ng the control adjusts the volume of the audio of the local headset connected into the bo om of

the BeltSta on. Turning the Volume control clockwise increases the audio level while turning the control counter clockwise

decreases the level.

Pressing the “CH A/B or “CH C/D” changes the selected intercom between A or B and C or D respec vely. The intercom

channel selected is indicated by the Channel Indicator LEDs located on the outer edge of each talk bu on, “TALK A/B” and

“TALK C/D.”

In Menu Mode, turning either Volume control allows the user to scroll through the menu op ons of the current menu

screen. Pressing either control selects the current menu op on and is the same as pressing ENTER. A menu item is not

selected and will not take a ect un l the control, or ENTER, is pressed.

For example, to adjust the Sidetone se ng:

• Connect a headset to the BeltSta on.

• Press MENU to enter Menu Mode.

• Rotate the Volume knob and scroll to “Set Controls.”

• Press ENTER to select, and scroll to “Sidetone.”

• Press ENTER to select the “Sidetone” adjustment.

Sidetone is expressed in Decibels (dB). You will see a level indicator with a numeric value between -30dB to -6dB. You should

speak into the headset microphone at a normal speaking level and adjust the sound of your own voice to a comfortable

level by rota ng either volume knob to adjust the Sidetone level. When sa s ed, press ENTER to save the adjustment. Press

MENU to move up one level in the menu tree. Press MENU repeatedly to exit Menu Mode and return to Opera onal Mode.

If no other items are selected, Menu Mode will automa cally exit and return to Opera on Mode a er a few seconds.

For addi onal informa on on the available BeltSta on menu se ngs, see the menu tree diagram and details in this manual.

Conﬁ gure the BeltSta on by the BaseSta on Interface

Many of the se ngs of the BeltSta on can be adjusted wirelessly from the BaseSta on. On the BaseSta on, press MENU,

select BeltSta on Se ngs, and scroll to the required op ons. This feature allows the communica ons engineer to control

many of the BeltSta on’s func ons without the need to remove the BeltSta on from the user.

As an example, to adjust the

Ba ery Alert on a BeltSta on from the BaseSta on:

• On the BaseSta on, press MENU to enter Menu Mode

• Rotate the Volume knob to scroll to “BeltSta on Se ngs” and press ENT.

• Select the BeltSta on to be adjusted and press ENT.

• Scroll to “Ba ery Alert” and press ENT to select the “Ba ery Alert” adjustment.

You will see op ons for ON and OFF. Rotate the “Volume” knob to select your preference and press ENTER to select. Con rm

the selec on on the BeltSta on display. Press MENU to move up one level in the menu tree. Press MENU repeatedly to exit

Menu Mode and return to Opera onal Mode. If no other items are selected, Menu Mode will automa cally exit a er one

minute.

For addi onal informa on on the BeltSta on menu se ngs, available from the BaseSta on menu, see the BaseSta on

menu tree diagram in this manual.