Specifications

CHAN SEL (A/A+B/B)
Slide-switch; choose which channel(s) will receive program input to
monitor: either
Channel A only, both A and B, or Channel B only.
CHANNEL A & B OUTPUTS
3-pin male XLR connectors; pin-out assignment is:
Pin 1-- ground
Pin 2-- DC voltage
Pin 3-- intercom audio
(channel A or B)
MAINS SELECT
Slide-switch; choose 115V or 230V depending on source of AC power. The
CS-210 is set up with a fuse for operation from 115VAC; you must change
the fuse from 1/2 amp value to 1/4 amp (slow-blow) if operation from
230VAC is required.
15