User guide

9
PG2-MADI-F-FX User Guide
3 Front Panel
Word Clock LED: Indicates the selected word clock source:
INT: Internal word clock
BNC: External via BNC Input
NET: Word clock received from network
Status LEDs of MADI Input 1 and 2:
INPUT SYNC Indicates the status of MADI Input
LED ON: Valid MADI frame is present
LED OFF: No MADI signal is present or signal is not valid
OUTPUT ON Indicates the status of MADI Output
MADI Indicates if there is MADI protocol active
56 / 64 MADI format and number of channels
LED ON: 64 CH = single speed (AES10-2003)
LED OFF: 32 CH = double speed (AES10-2003)
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Signal status of the eight channel groups, each group representing eight audio
channels:
LED ON: Signal present
LED OFF: No signal present
AUDIO LINK: Indicates the audio link status
SL1: Communication is established via SANE 1 (rear panel)
SL2: Communication is established via SANE 2 (rear panel)
OL1: Communication is established via OPTOCORE LINK 1 (rear panel)
OL2: Communication is established via OPTOCORE LINK 2 (rear panel)
System status
Master LED: Indicates the master unit
OPTO LED: OPTOCORE communication is established
SANE LED: SANE communication is established
Device ID Display: Indicates the identification number of the device
HEALTH LED: Green: Power supply is correctly working, temperature is below the limit
PWR 1 LED: Power supply 1 is working correctly
PWR 2 LED: Power supply 2 is working correctly
USB plug and LED: USB connection for remote control via PC
Green: Indicates data activity