CLEAR-COM ENCORE KB-701 SPEAKER STATION INSTRUCTION MANUAL
KB-701 Speaker Station Instruction Manual Part Number: 810350Z Rev. 3 Legal Disclaimer Copyright © 2013 HME Clear-Com Ltd. All Rights Reserved Clear-Com, the Clear-Com logo, and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc. The software described in this document is furnished under a license agreement and may be used only in accordance with the terms of the agreement.
CONTENTS OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii KB-701 SPEAKER STATION
IMPORTANT SAFETY INSTRUCTIONS Please read and follow these instructions before operating this product. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol alerts you to the presence of uninsulated dangerous voltage within the product's enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product's case. This symbol informs you that important operating and maintenance instructions are included in the literature accompanying this product.
OPERATION INTRODUCTION Congratulations on choosing this Clear-Com product. Clear-Com was established in 1968 and remains the market leader in providing intercoms for entertainment, broadcast and industrial applications. The ruggedness and high build-quality of Clear-Com products defines the industry standard. In fact, many of our original beltpacks and main stations are still in daily use around the world.
Although the optional EB7-TW daughter board module allows this unit to function on a TW line, the unit’s operation will remain single channel. Also, the EB7-4W four-wire daughter board module is available to allow long-distance connections using separate pairs of wires for send audio and receive audio. The KB-701 is compatible with all Clear-Com party-line intercoms. OPERATION Normal operation of the KB-701 speaker station only requires access to the front-panel controls.
2. Call Button: Pressing the call button sends a call signal on the intercom line and causes all the call lights on other stations on the intercom channel to light. The call button lights red when a call signal is sent or received on the intercom line. 3. Speaker: The audio output for the KB-701 device. 4. Volume Control: Turn this control to set the speaker’s required listen level. This control does not affect the tone alert level or the program input level. 5.
7. Call Alert Tone Level Control: This internal control adjusts the volume of the call alert tone sound. This is normally adjusted when the system is set up and shouldn’t need to be adjusted during normal operation. This feature can be disabled by turning the control fully counterclockwise. An audible tone alert can sound when a call signal is received on the intercom channel. This can be useful when the operator's attention has been drawn away from the KB-701 indicator panel.
• The default position of these switches is in the off position for normal mode, which is the only mode in which the call alert tone functions operate. In other modes, the call alert tone is automatically disabled to avoid interference with operation. Note: Only normal mode may be used when the EB7-4W four-wire option module is installed. 10. Intercom Line Connection: The KB-701 contains a five-terminal, plug-on connector for intercom line connection.
P rogram Input C able Wiring: 1 3 2 P in 1 K B-701 P rogram Input C onnector XLR C onnector Figure 1-4: Program Input Cable Wiring 12. Option Board Jumpers: The two jumper plugs P1 and P3 must be installed when optional modules are not used. When the optional EB7-4W or EB7-TW modules are used, both P1 and P3 must be removed. Save these jumper plugs for possible future use. Note: 1-6 The KB-701 will not operate without either the jumper plugs or the optional modules installed.
INSTALLATION 1. Unpack the unit and inspect it for any damage that may have occurred during shipping. 2. Set the option switches to the default (toward the front panel) position. 3. Connect the intercom lines. 4. Install the KB-701 into the four-gang outlet box or V-Box. (For additional information, refer to the Clear-Com System Installation Manual.) 5. Set listen levels. (Refer to “Intercom Level Control.”) 6. The speaker station should now be operating properly.
2-2 KB-701 SPEAKER STATION
MAINTENANCE This chapter provides maintenance information including a block diagram and troubleshooting tips. Caution:These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
TROUBLESHOOTING TIPS SYMPTOM System does not operate. The talk button does not light. CAUSE SOLUTION (1) No intercom connection to the KB-701. If the EB7-4W four-wire option module is connected, no AC power is reaching the KB-701. (1) Check connections and cable. (2) The KB-701 has an internal failure. (2) Unit requires servicing. System operates incorrectly.
SYMPTOM Excessive crosstalk. Program signal sounds distorted. The call signal does not function. CAUSE SOLUTION (1) High DC resistance in ground return. (1) Use heavier cable; add additional conductor(s) to ground return. If the cable run is exceptionally long, consider adding and using the EB7-4W four-wire option module. (2) Multi-channel cable pairs are not individually shielded. (2) Replace cable with individually shielded pairs. (1) Program level control set too high.
3-4 KB-701 SPEAKER STATION
TECHNICAL SPECIFICATIONS KB-701 SPEAKER STATION dBu is an absolute measurement. 0 dBu is referenced to 0.
Internal Connectors and Jumpers Intercom: Line Program Input Option Switches Front Panel Controls & Indicators Environmental Five terminal connector Three terminal connector Three DIP switches (1) Program level control (1) Intercom level control (1) Talk button (1) Call button (1) Integral microphone 32 - 122o F (0 - 50o C) Dimensions 8.5 in. W x 4.5 in. H x 1.75 in. D (210 mm x 114 mm x 44 mm) Weight 1.04 lbs. (0.
LIMITED WARRANTY Clear-Com offers 24 x 7 customer support if you have an Extended Warranty or Service Contract. Return Material Authorization (RMA) numbers are required for all returns. Both warranty and non-warranty repairs are available. Clear-Com warrants that at the time of purchase, the equipment supplied complies with any specification in the order confirmation when used under normal conditions, and is free from defects in workmanship and materials during the warranty period.
period will be offered at no charge between 09:00 and 17:00 according to the customer’s local time zone. In addition, for customers who purchase an Extended Warranty or Service Contract, 24-hour customer support is offered immediately upon purchase of such agreement. For more information, contact your authorized dealer, distributor, or sales representative. Instructions for reaching Clear-Com’s User Support Centers are given below. Americas and Asia-Pacific Headquarters California, United States Tel: +1.
Clear-Com has the right to inspect the equipment and/or installation or relevant packaging. NON-WARRANTY REPAIRS AND RETURNS For items not under warranty, you must obtain an RMA by contacting the User Support Center. Clear-Com representatives will give you instructions and addresses for returning your equipment. You must pay all charges to have the equipment shipped to the support center and returned to you, in addition to the costs of the repair.
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR THE LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT, TO THE MAXIMUM EXTENT PERMITTED UNDER APPLICABLE LAW, CLEAR-COM'S LIABILITY TO CUSTOMER HEREUNDER SHALL NOT UNDER ANY CIRCUMSTANCES EXCEED THE COST OF REPAIRING OR REPLACING ANY PART(S) FOUND TO BE DEFECTIVE WITHIN THE WARRANTY PERIOD AS AFORESAID.
