User Manual
Table Of Contents
- 1 Important Safety Instructions
- 2 Introduction
- 3 Installation Overview
- 4 Locating System Components
- 5 Powering System Components
- 6 Wiring System Components
- 6.1 Using RJ-45 connectors
- 6.2 Connecting the matrix frame to a PC running EHX
- 6.3 Connecting the matrix frame to an Ethernet network
- 6.4 Connecting the matrix frame to a PC running Production Maestro Pro
- 6.5 Connecting the matrix frame to user panels
- 6.6 General Purpose Outputs (GPOs)
- 6.7 General Purpose Inputs (GPIs)
- 6.8 E & M signalling with an E-QUE E1 / T1 interface card
- 6.9 Connecting the matrix frame to an external alarm
- 6.10 Connecting to a four-wire audio device
- 6.11 Connecting to interface modules
- 6.11.1 Wiring schemes for the FOR-22 interface module
- 6.11.2 Wiring schemes for the CCI-22 interface module
- 6.11.3 Wiring for Clear-Com analog partyline systems (including Encore)
- 6.11.4 Wiring schemes for TEL-14 interface modules
- 6.11.5 Wiring scheme for the RLY-6 interface module
- 6.11.6 Wiring schemes for a GPI-6 Interface module
- 7 Connecting Matrix Frames
- 8 Glossary
Figure 28: GPI-6 interface module examples
Figure 28 shows you how to connect switches or contacts using the power source provided
by the GPI-6 module or powering switches from external sources. Each input can be wired to
be isolated from each other as a further variation.
Wiring the GPI-6 to an IMF-102 interface frame
The wiring of a GPI-6 interface that is placed in an IMF-102 interface frame is the same as
the wiring for a GPI-6 interface placed in an IMF-3 interface frame.
The only difference is that an IMF-102 interface frame houses only two interfaces, and they
are mounted horizontally rather than vertically in the frame.
Tip: Figure 5: IMF-3 rear panel and Figure 4: IMF-102 rear panel illustrate the differences
between these interface frames.
For more information, see your IMF-102 and IMF-3 documentation.
To define an input function, use the EHX configuration software (see your EHX
documentation and EHX Help).
70
Eclipse HX Matrix Frame Installation Guide