User Manual
Table Of Contents
- 1 Important Safety Instructions
- 2 Introduction
- 3 Installation Overview
- 4 Locating System Components
- 5 Powering System Components
- 6 Wiring System Components
- 6.1 Using RJ-45 connectors
- 6.2 Connecting the matrix frame to a PC running EHX
- 6.3 Connecting the matrix frame to an Ethernet network
- 6.4 Connecting the matrix frame to a PC running Production Maestro Pro
- 6.5 Connecting the matrix frame to user panels
- 6.6 General Purpose Outputs (GPOs)
- 6.7 General Purpose Inputs (GPIs)
- 6.8 E & M signalling with an E-QUE E1 / T1 interface card
- 6.9 Connecting the matrix frame to an external alarm
- 6.10 Connecting to a four-wire audio device
- 6.11 Connecting to interface modules
- 6.11.1 Wiring schemes for the FOR-22 interface module
- 6.11.2 Wiring schemes for the CCI-22 interface module
- 6.11.3 Wiring for Clear-Com analog partyline systems (including Encore)
- 6.11.4 Wiring schemes for TEL-14 interface modules
- 6.11.5 Wiring scheme for the RLY-6 interface module
- 6.11.6 Wiring schemes for a GPI-6 Interface module
- 7 Connecting Matrix Frames
- 8 Glossary
6.11.1 Wiring schemes for the FOR-22 interface module .......................................... 56
6.11.2 Wiring schemes for the CCI-22 interface module ............................................ 58
6.11.3 Wiring for Clear-Com analog partyline systems (including Encore) ...... 58
6.11.4 Wiring schemes for TEL-14 interface modules ............................................... 60
6.11.5 Wiring scheme for the RLY-6 interface module ............................................... 64
6.11.6 Wiring schemes for a GPI-6 Interface module ................................................ 67
7 Connecting Matrix Frames .............................................................................. 71
7.1 Intelligent linking ..................................................................................................... 71
7.1.1 Intelligent linking with trunk lines ..................................................................... 72
7.1.2 Serial port to serial port linking ........................................................................ 72
7.2 Linking Eclipse HX-Pico matrix frames with the PiCo-Link .................................... 74
7.3 Tie-line (audio only) linking ..................................................................................... 75
7.4 E1 / T1 linking ......................................................................................................... 75
7.4.1 E1 trunk connections ....................................................................................... 76
7.4.2 T1 trunking ...................................................................................................... 79
7.5 Fiber-optic linking ................................................................................................... 81
8 Glossary ........................................................................................................... 84
5
Eclipse HX Matrix Frame Installation Guide