User Manual

5.1 Powering matrix frames .......................................................................................... 26
5.1.1 Eclipse HX-Omega and Eclipse HX-Median ................................................... 27
5.1.2 Eclipse HX-Delta ............................................................................................. 27
5.1.3 Eclipse HX-PiCo .............................................................................................. 27
5.2 Powering user panels ............................................................................................. 28
5.2.1 V-Series panels ............................................................................................... 28
5.2.2 I-Series panels ................................................................................................ 28
5.3 Powering interface frames ...................................................................................... 28
5.3.1 IMF-3 ............................................................................................................... 28
5.3.2 IMF-102 ........................................................................................................... 30
5.3.3 Current capacities and consumption ............................................................... 30
6 Wiring System Components ........................................................................... 31
6.1 Using RJ-45 connectors ......................................................................................... 31
6.1.1 Cabling standards ........................................................................................... 32
6.1.2 Recommended cables, connectors and wiring tools ....................................... 33
6.1.3 Installing RJ-45 Connectors ............................................................................ 33
6.2 Connecting the matrix frame to a PC running EHX ................................................ 35
6.2.1 Ethernet connection to the PC ........................................................................ 35
6.2.2 Serial connection to the PC ............................................................................. 35
6.3 Connecting the matrix frame to an Ethernet network ............................................. 38
6.4 Connecting the matrix frame to a PC running Production Maestro Pro .................. 39
6.4.1 LMC-64 interface card ..................................................................................... 39
6.5 Connecting the matrix frame to user panels ........................................................... 39
6.5.1 4-Pair analog wiring ......................................................................................... 39
6.6 General Purpose Outputs (GPOs) .......................................................................... 41
6.7 General Purpose Inputs (GPIs) .............................................................................. 44
6.7.1 Modes for General Purpose Inputs (GPIs) ...................................................... 46
6.8 E & M signalling with an E-QUE E1 / T1 interface card .......................................... 48
6.8.1 Example: Ship-to-shore satellite system ......................................................... 48
6.8.2 Enabling E & M signaling on the E-QUE card ................................................. 49
6.8.3 Using the GPIs / GPOs to trigger actions ........................................................ 51
6.9 Connecting the matrix frame to an external alarm .................................................. 53
6.9.1 Connecting to the alarm outputs of the PSU-101 power supply ...................... 53
6.10 Connecting to a four-wire audio device .................................................................. 54
6.11 Connecting to interface modules ............................................................................ 54
4
Eclipse HX Matrix Frame Installation Guide