Instruction Manual

CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 10 of 49
2.2.3 “Flash Downloader” for Beltpack DECT updates
1) Install the DECT loader onto a PC with a serial port.
2) Connect the PC to the Beltpack using the Beltpack registration cable.
3) Start up the Flashloader program, set as follows with the correct DECT

4)             
unchecked.
5) For FS-BP MK I and PD2202 beltpacks only. Power up the BP and check that
the black markers are appeari       

etc.
6) For FS-BP MKII click the start button to begin the download.
7) The ildr_425.hex can be found in the DECT images directory.