Instruction Manual

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 83 of 155 Part Number: 810377Z Rev 6
12. Select the XCF16P device in the chain, then right click in the main window and
select Program. In the Programming Properties pop-up window only the ‘Erase
Before Programming’ and the ‘Verify’ options should be selected.
Figure 79 - Device Programming Properties
13. You'll now be back at the boundary scan diagram.
14. Select the XCF16P device and right click and select "Program" from the pop-
up menu.
15. Click ‘OK’ to begin programming which should take approximately 2 minutes to
complete.
16. The banner “Program Succeeded” should appear in the main window.