Instruction Manual

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 47 of 155 Part Number: 810377Z Rev 6
14. Place the board DIP switches into normal mode for a new application
download as shown below.
Figure 37 - PiCo DIP Switches in Default Mode
15. Power cycle or reset the Eclipse-Pico / E-32 so the DIP switch changes come
into effect.
16. Open the ‘File’ menu and select ‘Send file…’ on the menu.
Figure 38 - TeraTerm File Menu
17. Locate the configuration card application code .4kr file within the ‘Select file to
download’ dialogue and click on ‘OK’.