Instruction Manual

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 124 of 155 Part Number: 810377Z Rev 6
3. Select option 6, "Download FPGA Image".
4. You will be prompted to delete the old FPGA image. This needs to be done, so
press "Y". (Note that key entry is case sensitive, so caps lock needs to be on).
The card will then delete the old image and then prompt for a new FPGA
image:
Figure 107 - AES-6 FPGA Erase
5. In TeraTerm, select Send File and select the FPGA image.
6. During the download the six yellow LEDs should be illuminating in a circulating
anti-clockwise direction.