Instruction manual

Clear-Com Communication Systems
Eclipse-32 Matrix Instruction Manual
1-4
• Forced listens (normally made routes)
• Port I/O level control
• Local and global ISO routes
• Control labels
The Eclipse-32 matrix allows TCP/IP access to the system for updates.
The system may be accessed remotely for programming or to retrieve
configurations. Up to four full-system configurations may be stored in
the Eclipse-32 matrix, and an unlimited number of configurations may
be backed up on a computer and downloaded to the matrix as needed.
INDIVIDUAL LEVEL CONTROL
Both incoming and outgoing volume levels can be adjusted for each
device connected to an Eclipse-32 port, which allows the Eclipse-32 to
be connected to a wide variety of panels and communications devices
either directly via the port or via interfaces. On the panels, individual
listen-level controls allow the operator to adjust the level of each key to
provide a customized audio “mix”.
EXCELLENT AUDIO QUALITY
The Eclipse-32 matrix features industry-leading 24-bit, 48 kHz audio
sampling, yielding a frequency response of 30 Hz to 22 kHz, ± 3 dB.
With a signal-to-noise ratio better than –70 dB, and crosstalk better
than –70 dB, the audio among panels, interfaces, and other system
inputs and outputs is clean and distinct. Level adjustments are in
0.355 dB steps, which will sound completely smooth to the user.
ROBUST AND COMPATIBLE
The Eclipse-32 matrix houses two independent power supplies. These
may be connected to a main and backup power source for
redundancy. In the unlikely event of the failure of one of these power
supplies, the second supply will automatically take over. The
Eclipse-32 is robust even in the face of a major power outage. In the
event of a complete power interruption the system will return with all
previously set talk and listen paths in place when power is restored.
The Eclipse-32 matrix is fully compatible with Clear-Com’s modular
matrix interface modules and frames. It can transparently interface
with telephones, two-way radios, camera and 2-wire intercoms, 4-wire
devices, and audio sources. Eclipse-32 is also compatible with most of
the matrix intercom panels, including the V-Series, ICS-92, ICS-2003,
4000 series, and i-stations.