Instruction manual

ECLIPSE OMEGA MATRIX INSTRUCTION MANUAL
i
FIGURES
The Eclipse Omega Matrix Assembly ............................................................1-2
Front Panel of Eclipse Omega Matrix ...........................................................2-1
CPU Card’s Front Panel Lights and Controls ...............................................2-4
Port Card’s Lights and Controls ....................................................................2-8
Power supply module’s front door ..............................................................2-11
The Eclipse houses three types of rear-connector panels ..............................2-15
CPU Card’s Rear-Connector Panel ............................................................. 2-16
Front Fiber Card ........................................................................................... 3-3
Rear Fiber Card ............................................................................................3-5
Ring Topology Single Card Set Redundancy ................................................3-7
Ring Topology Dual Card Set Redundancy ................................................3-10
Front E-Que Card ........................................................................................4-3
Rear E-Que Card ..........................................................................................4-5
E-Que Card Antenna Connection ................................................................4-7
E-Que Card Splitter Connection ..................................................................4-8
Multiple Matrices with DECT Sync Interconnect ........................................4-9
CPU card with detail of CON9 jumper plugs ...............................................5-1
Wiring from the Matrix to an Analog Panel Using RJ-45 .............................5-7
Wiring from the Matrix to a Digital Panel Using RJ-45 ................................5-8
CPU Card Interface Connectors ................................................................... 5-9
Wiring the Matrix DB-9M to a DB-9F Computer Serial Port Connector ...5-10
Wiring the Matrix DB-9M to a DB-25F Computer Serial Port Connector .5-10
Wiring the Alarm I/O Connector to an Alarm Relay Connector .................5-11
Eclipse Omega Matrix’s Double-Pole Double-Throw Alarm Relay .............5-12
Pin Configuration of the General-Purpose Outputs Connector ..................5-13
Opto-Isolated Connection to Eclipse Omega GPI Connector .....................5-14
Non-Isolated Connection to Eclipse Omega GPI Connector ......................5-14
Pin Assignments for Eclipse Omega General-Purpose Inputs Connector ....5-15
Pin Assignments for LAN1 and LAN2 Connectors .....................................5-16
System Block Diagram .................................................................................. 6-7