Instruction manual

ECLIPSE OMEGA MATRIX INSTRUCTION MANUAL
4-9
Figure 4-5: Multiple Matrices with DECT Sync Interconnect
All connections are made using CAT5 cable and it is recommended that shielded
cable is used.
Note: If an E-Que card is fitted in the Omega with antennae or splitters
connected and active inserting a second E-Que card to the left of the first
card (seen from the front) will cause a temporary loss of audio to beltpacks
using the original E-Que card (usually for about 10 seconds). The
beltpacks do not go offline and signalisation is not lost.
Matrix 1
Matrix 2
E-Que
Card 1
E-Que
Card 2
Splitter 1
Splitter 2
DECT
Sync
LAN
Out
In