Instruction manual

ECLIPSE OMEGA MATRIX INSTRUCTION MANUAL

3-4

Primary Link Status LEDs

These LEDs indicate the status and functioning of the primary (A) fiber optic

link.

Link LED

This LED indicates whether a link has been established on the primary fiber

optic circuit (transceiver A). When illuminated a link is present.

TXVR LED

This LED indicates when data is being transmitted on the primary circuit. It is

illuminated when data is present on the circuit.

ACT LED

This LED is lit if the primary fiber optic circuit is active.

ERR LED

This LED will be illuminated if an error condition is detected on the primary

fiber optic circuit.

Secondary Link Status LEDs

These LEDs indicate the status and functioning of the secondary (B) fiber optic

link.

Link LED

This LED indicates whether a link has been established on the secondary fiber

optic circuit (transceiver A). When illuminated a link is present.

TXVR LED

This LED indicates when data is being transmitted on the secondary circuit. It is

illuminated when data is present on the circuit.

ACT LED

This LED is lit if the secondary fiber optic circuit is active.

ERR LED

This LED will be illuminated if an error condition is detected on the secondary

fiber optic circuit.

Status LED

The green “frame data” LED illuminates to indicate successful communication

between the fiber master card and the CPU card.