Instruction manual

ECLIPSE OMEGA MATRIX INSTRUCTION MANUAL

2-18

intercom panel’s microphone on or off, muting a microphone’s output, or

turning a panel’s speaker off. You choose the function to perform and the panel

upon which it is performed from the assignment program.

LOCAL AREA NETWORK 1 CONNECTOR (“LAN 1”)

The RJ-45 socket labeled “LAN 1” connects a local area network (LAN) to the

CPU card through a standard Ethernet connection. The green LED indicates

the port is connected and the amber LED indicates activity.

If you use this port, you must add a ferrite to the socket end of each cable. A

suitable ferrite is Würth Electronik part: 74271132. “

LOCAL AREA NETWORK 2 CONNECTOR (“LAN 2”)

The RJ-45 socket labeled “LAN 2” connects a second local area network (LAN)

to the CPU card through a standard Ethernet connection. The green LED

indicates the port is connected and the amber LED indicates activity.

If you use this port, you must add a ferrite to the socket end of each cable. A

suitable ferrite is Würth Electronik part: 74271132.

CONNECTING PORT CARDS

Each rear-connector panel associated with an MVX-16 port card holds the

sixteen RJ-45 connectors that connect the matrix to intercom panels and

interfaces. Each front-installed MVX-A16 port card requires a corresponding

rear-connector panel. Blank panels cover unused slots.

You can locate and identify each port on the matrix by using the rear-panel

numbering grid.

• Columns 1 through 15 identify cards.

• Rows 1 through 16 identify ports on each card.

• Processor cards are designated P1 and P2.

You can identify a port precisely by identifying its card number and port number

on the card. For exaample, the ports on the first card are designated 1-1, 1-2, 1-3,

1-4, and so on; the ports on the second card are designated 2-1, 2-2, 2-3, 2-4,

and so on.

Each rear-connector panel associated with a fiber card hold two fiber connection

ports. Each front-installed E-FIB card requires a corresponding rear-connector

panel.

Each rear connector panelassociated with an E-Que card hold eleven RJ-45

ports:

• Eight ports for connection to wireless equipment.

• Two ports for DECT sync.

• One port for LAN interface.